MultiMate™ technology allows Diginet LEDsmart+ devices to be wired in parallel to the same lighting load to provide two-way, three-way or multi-way dimming and switching for the first time without the need for strapper wires, dedicated remote switch wiring or ‘control bus’.
With no additional wiring, no expensive control systems and no new installation methods to learn, Diginet LEDsmart+ is the quick and easy way to add value and convenience to your customers.
What is Multimate™ Technology?
MultiMate™ is a revolutionary patented technology, developed right here in Australia by Diginet Control Systems – part of the Gerard Lighting Group – that allows multi-way switching and dimming of lighting wired in parallel without the need for an expensive lighting control system.
Single and multi-way dimming & switching without extra wires or controls.
MMDM/RT
Rotary Dimmer Switch
with built-in on/off switch and multi-way control
MMDM/PB
Push Dimmer Switch
with built-in on/off switch and multi-way control
MMSW/PB
Push Button Switch
for LED lighting with built-in multi-way control
MMTM/PB
Push Timer Minute
programmable between 1 and 30 minutes with built-in multi-way control
MMTH/PB
Push Timer Hour
programmable between ¼ hour and 7½ hours with built-in multi-way control
Accessories for easy customisation
Large & Small Dials
Standard
Customers can choose from large or small dimmer dials to suite their aesthetic and deliver single or multi-dimmer control from one wall plate
Interchangeable Coloured Bezels
Standard
Different coloured bezels allow the installer to customise the indicator bezel on the switch to suit the customer’s preference.
Interchangeable Coloured Rings
Standard
Different coloured silicon rings allow the installer to customise the Rotary Dimmer’s indicator ring to suit the customer’s environment.
Rotary Adaptor Kit for Clipsal Saturn™ & Clipsal Saturn Zen™ Wall Plates
Optional
Allows LEDsmart+ Rotary Dimmers to be quickly and easily adapted to fit Clipsal Saturn™ and Clipsal Saturn Zen™wall plates.
Push Button Labelling
Standard
Diginet LEDsmart+ Push Button devices can be fitted with optional ‘clear’ plastic cap, which allows a label to be placed inside. Labels can be printed on standard paper or thin card on any printer, in any font or colour.
Push Button Adaptor Kit For Clipsal Saturn™ & Clipsal Saturn Zen™ Wall Plates
Optional
Allows LEDsmart+ Push Button devices to be quickly and easily adapted to fit Clipsal Saturn™ and Clipsal Saturn Zen™wall plates.
LEDSMART+ PRODUCT
INSTALLATION AND SETUP GUIDES
For more information, click here to contact us or call 1300 799 300 to speak with our local representative.